 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 0.5m CMOS Gate Array CMOS-N5 Family N e w cts odu Pr Features The CMOS-N5 family is a channel-less type gate array that provides high speed operation with a 5-V power supply voltage. Drastic cost reductions have been achieved compared with the conventional CMOS-6 and CMOS-8 families thanks to higher integration by the adoption of 0.5 m technology (2-layer wiring), and lowering the package assembly cost. Moreover, the 3-V power supply voltage is supported for the CMOS-N5 family. NEW CMOS-6 Family CMOS-N5 Family CMOS-8 Family [Integration] * 3K to 120K gates (number of integrated gates) * 2K to 86K gates (number of usable gates) [Package] * QFP (Fine pitch) 160 to 304 pins * TQFP * LQFP 48 to 80 pins 44 to 160 pins [High-speed operation] (preliminary) * tPD = 0.26 ns (2-input NAND (power gate), fanout = 2, standard wiring length) * Operating frequency: 60 MHz max. [Function blocks] * CPU peripheral block * RAM block (1 port/2 ports) * Oscillation block * CTS block [Test design] * Scan path test 2 Pamphlet A13629EJ5V1PF Product Overview Product type list Product name Number of integrated gates Number of usable gates Number of pads Internal gate Power gate Input buffer Output buffer Output drive capability Power supply voltage Note 3 Note 1 PD65880 3456 2764 72 Note 2 PD65881 5880 4704 88 PD65882 13952 11161 120 PD65883 25344 20275 160 PD65884 33864 27091 184 0.46 ns (fanout = 2, wiring length=2mm) 0.30 ns (fanout = 2, wiring length=2mm) 0.33 ns (fanout = 2, wiring length=2mm) 1.30 ns (CL = 15 pF) IOL = 3, 6, 9, 12, 18, 24 mA 5 V 10 % (CMOS level) Product name Number of integrated gates Number of usable gates Number of pads Internal gate Power gate Input buffer Output buffer Output drive capability Power supply voltage Note 3 Note 1 PD65885 40768 28537 244 Note 4 PD65887 56496 39547 284 PD65889 76000 53200 324 PD65890 99528 69669 372 PD65893 123384 86368 412 0.46 ns (fanout = 2, wiring length=2mm) 0.30 ns (fanout = 2, wiring length=2mm) 0.33 ns (fanout = 2, wiring length=2mm) 1.30 ns (CL = 15 pF) IOL = 3, 6, 9, 12, 18, 24 mA 5 V 10 % (CMOS level) Notes 1. 2-input NAND conversion 2. Cell utilization rate 80 % 3. Including power supply and GND pins. The number of pins that can actually be used differs depending on the type of package. 4. Cell utilization rate 70 % Pamphlet A13629EJ5V1PF 3 Package list (1) Package QFP (FP) Number of pins 160 208 240 304 TQFP 48 64 80 LQFP 44 100 160 Lead pitch (mm) 0.5 0.5 0.5 0.5 0.5 0.65 0.5 0.8 0.5 0.5 Body height (mm) 2.7 3.2 3.2 3.7 1.0 1.0 1.0 1.4 1.4 1.4 Body size (mm) 24 x 24 28 x 28 32 x 32 40 x 40 7x7 12 x 12 12 x 12 10 x 10 14 x 14 24 x 24 Remark FP : Fine pitch 4 Pamphlet A13629EJ5V1PF Package list (2) Master name 160-pin QFP (FP) 208-pin QFP (FP) 240-pin QFP (FP) 304-pin QFP (FP) 48-pin TQFP 64-pin TQFP 80-pin TQFP 44-pin LQFP 100-pin LQFP 160-pin LQFP - - - - - - - - - - PD65880 - - - - PD65881 - - - - PD65882 - - - - PD65883 - - - - PD65884 - - - - - Master name 160-pin QFP (FP) 208-pin QFP (FP) 240-pin QFP (FP) 304-pin QFP (FP) 48-pin TQFP 64-pin TQFP 80-pin TQFP 44-pin LQFP 100-pin LQFP 160-pin LQFP PD65885 PD65887 PD65889 - PD65890 - PD65893 - - - - - - - - - - - - - - - - - - - - - - - - - Remark : Released - : Not to be supported Blank : Under consideration FP : Fine pitch Pamphlet A13629EJ5V1PF 5 Development Tools Easy interface with your EWS or PC Users can choose the following tools to their environment. Caution Some functions may not be supported. Make it sure before use. OPENCADTM V5.4 Configuration Tool Function Function simulator NEC Tool - Interface Data * Netlist PWC/EDIF(2.0.0)/ Schematic editor Logic synthesis Gate level simulator Note 1 Commercially Available Tool Interface ModelSimTM/Verilog-XLTM/ NC-VerilogTM/VCSTM - Design Compiler (R) VdrawTM - V.sim TM VerilogTM HDL * Test pattern ALBA ModelSim/Verilog-XL/NC-Verilog/ VCS Formality (R)/TuxedoTM-LEC Formal verifier STANote 1 Fault simulator Note 2 Design for test Tiara - * Delay information file PrimeTime(R) - C.FGRADETM TESTACT/NEC_SCAN/ NEC_BSCAN/NEC_BIST/ TESTBUS * Constraints file TM TestCompiler /TestgenTM FastScanTM/TetraMaxTM Floor planner Note 3 ace_floorplan galet_floorplan - Placement and Routing Note 3 Galet Gate EnsembleTM Silicon EnsembleTM Notes 1. Sign-off tool 2. Tool not supported in the HPTM version 3. Stand-alone tool Remark Platform: SUNTM(SolarisTM)/HP(HP-UXTM) GUI : X11R5/MotifTM 1.2 C.FGRADE, OPENCAD, Vdraw and V.sim are trademarks of NEC Corporation. Design Compiler is a registered trademark of Synopsys, Inc. in Japan. PrimeTime and Formality are registered trademarks of Synopsys, Inc. in the USA. Testgen, TetraMAX, TestCompiler and VCS are trademarks of Synopsys, Inc. Gate Ensemble, Silicon Ensemble, NC-Verilog, Verilog, and Verilog-XL are trademarks of Cadence Design Systems, Inc. ModelSim is a trademark of Model Technology, Inc. Tuxedo is a trademark of Verplex System, Inc. FastScan is a trademark of Mentor Graphics, Inc. SUN and Solaris are trademarks of SUN Microsystems, Inc. HP and HP-UX are trademarks of Hewlett-Packard Co. Motif is a trademark of Open Software Foundation, Inc. (OSF). 6 Pamphlet A13629EJ5V1PF The export of this product from Japan is regulated by the Japanese government. To export this product may be prohibited without governmental license, the need for which must be judged by the customer. The export or re-export of this product from a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales representative. * The information in this document is current as of February, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 Pamphlet A13629EJ5V1PF 7 For further information, please contact: NEC Corporation NEC Building 7-1, Shiba 5-chome, Minato-ku Tokyo 108-8001, Japan Tel: 03-3454-1111 http://www.ic.nec.co.jp/ [North & South America] NEC Electronics Inc. 2880 Scott Blvd. Santa Clara, CA 95050-2554, U.S.A. Tel: 408-588-6000 800-366-9782 Fax: 408-588-6130 800-729-9288 http://www.necel.com/ NEC do Brasil S.A. Electron Devices Division Rodovia Presidente Dutra, Km 214 07210-902-Guarulhos-SP Brasil Tel: 011-6462-6810 Fax: 011-6462-6829 [Europe] NEC Electronics (Germany) GmbH Kanzlerstr. 2, 40472 Dusseldorf, Germany Tel: 0211-650302 Fax: 0211-6503490 http://www.nec.de/ Munich Office Arabellastr. 17 81925 Munchen, Germany Tel: 089-921003-0 Fax: 089-92100315 Stuttgart Office Industriestr. 3 D-70565 Stuttgart, Germany Tel: 0711-99010-0 Fax: 0711-99010-19 Hannover Office Podbielskistr. 164 D-30177 Hannover, Germany Tel: 0511-33402-0 Fax: 0511-33402-34 Benelux Office Boschdijk 187a 5612 HB Eindhoven, The Netherlands Tel: 040-2445845 Fax: 040-2444580 Scandinavia Office P.O. Box 134 18322 Taeby, Sweden Tel: 08-6380820 Fax: 08-6380388 NEC Electronics (UK) Limited Cygnus House, Sunrise Parkway, Linford Wood, Milton Keynes, MK14 6NP, U.K. Tel: 01908-691-133 Fax: 01908-670-290 NEC Electronics (France) S.A. 9, rue Paul Dautier-B.P. 52 78142 Velizy-Villacoublay Cedex France Tel: 01-3067-5800 Fax: 01-3067-5899 Madrid Office Juan Esplandiu, 15 28007 Madrid, Spain Tel: 091-504-2787 Fax: 091-504-2860 NEC Electronics Italiana s.r.l. Via Fabio Filzi, 25/A, 20124 Milano, Italy Tel: 02-667541 Fax: 02-66754299 [Asia & Oceania] NEC Electronics Hong Kong Limited 12/F., Cityplaza 4, 12 Taikoo Wan Road, Hong Kong Tel: 2886-9318 Fax: 2886-9022/9044 Seoul Branch 10F, ILSONG Bldg., 157-37, Samsung-Dong, Kangnam-Ku Seoul, the Republic of Korea Tel: 02-528-0303 Fax: 02-528-4411 NEC Electronics Taiwan Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan, R. O. C. Tel: 02-2719-2377 Fax: 02-2719-5951 NEC Electronics Singapore Pte. Ltd. 238A Thomson Road #12-01/10 Novena Square Singapore 307684 Tel: 253-8311 Fax: 250-3583 G01. 7 Document No. A13629EJ5V2PF00(5th edition) Date Published August 2001 N CP(K) (c) NEC Corporation 1998 Printed in Japan |
Price & Availability of UPD65882F1-XXX-CN1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |